18 x 150 Unfinished - In Stock

Our widest unfinished solid oak - very low machining tolerances for easy fit, and ready for finishing as you want.

Availability:

In stock, so 2-3 days from order and cleared payment.

Specification:

• Available as 18 x 150 and 18 x 120 sizes
• Machined from one piece of solid oak
• Lengths of 300-1800mm with an average of 750mm
• T&G 4 sides and End Matched
• Micro-bevelled 4 sides
• Moisture Content: 8-12%
• Grade Mix of 25% each A, B, C, and D.
• Suitable for UFH? - NO

Full Spec Sheet Available at: www.SeeOurProducts.co.uk/specs/

IMPORTANT:
If for some reason you’re just interested in prices and not the overall quality, please note that our Solid Oak boards are machined to very low tolerances, thus reducing selection and fitting time, and remedial work required after installation. This all adds up to a saving in cost and time for you. Before you order on price alone somewhere else, always check the machining tolerances for the product you want because the extra work required after installation can make that product very expensive. We’ve seen 130mm wide boards varying by 4mm in width over a 1200mm length!

IMPORTANT:
Within the packs supplied, there will be very few lengths over 1200mm because our selection and quality process eliminates the longer boards when grading. The average length is 750mm.
Because of the way that Oak grows, and the quality grading process that we insist upon, lengths above 1200mm are seldom available.

NB
Solid oak is a natural product and is susceptible to dimensional changes when subjected to varying levels of heat, humidity, and moisture.
Wider boards over 150mm and less than 18mm thick are more susceptible to ‘cupping’ and it’s advisable to face fix these size boards to avoid this costly problem.
As you can see, we don’t supply any solid board over 150mm because of these reasons. Please note that the fitting responsibility is always with the owner/fitter and not us as a company.

Overall Grade Mix – 25% mix of each A, B, C and D grades to give an authentic appearance of natural oak with natural features and character.
A Grade – Allows live knots no more than 10mm, repaired dead knots no more than 5mm. Sapwood no more than 5% of face area. Allows natural grain and colour difference.
B Grade - Allows live knots no more than 25mm, repaired dead knots no more than 10mm. Sapwood no more than 15% of face area. Allows natural grain and colour difference.
C Grade - Allows repaired dead knots no more than 25mm. Sapwood no more than 30% of face area. Allows natural grain and colour difference.
D Grade - Allows larger repaired dead knots. Sapwood no more than 40% of face area. Allows natural grain and colour difference. Open defects are filled and sanded.

Where a wider board is required, or in situations where a solid oak cannot be fitted, please consider our range of Engineered Flooring

Click here to request a Free Sample.