Specification:
Machined from one piece of solid oak
Lengths of 300-1800mm with an average of 750mm
T&G 4 sides and End Matched
Micro-bevelled 4 sides
Moisture Content: 8-12%
Full Spec Sheets Available At:
http://www.SeeOurProducts.co.uk/specs
Grade Mix Video Available At:
http://www.youtube.com/watch?v=h9U2QOklTDU
Finishes Available Video Available At:
http://www.youtube.com/watch?v=umeA2qx9Rp0
IMPORTANT:
Within the packs supplied, there
will be very few lengths over 1200mm because our selection and
quality process eliminates the longer boards when grading. The
average length s 750mm.
Because of the way that Oak
grows, and the quality grading process that we insist upon,
lengths above 1200mm are seldom available.
(We can source longer
length boards and also Prime Grade but the cost will be
significantly higher, and these are only available in full
pallets on a 3 month delivery from order).
NB
Solid wood is a natural product and is susceptible to
dimensional changes when subjected to varying levels of heat,
humidity, and moisture.
Wider boards over 150mm and less than 18mm
thick are more susceptible to ‘cupping’ and it’s advisable to
face fix these size boards to avoid this costly problem.
As you can see, we don’t supply any solid
board over 150mm. Please note that the fitting responsibility is
always with the owner/fitter and not us as a company.
Wider boards over 120mm are more susceptible to ‘cupping’ and
it’s advisable to face fix these size boards to avoid this
costly problem.
As you can see, we only supply one solid board over 120mm and
that’s the 18 x 150 U/F. This decision was based purely on
demand and the fitting responsibility is always with the
owner/fitter and not us as a company.
Where a wider board is required, or in situations where a solid
oak cannot be fitted, please consider our range of engineered
boards by clicking
HERE
Request a Free Sample by clicking
HERE
